A guide to Carbon Fiber Reinforced Polymer repairs

However, the carbon laminate manufacturing process is complex and requires either manual labor or expensive robotic machines, both of which result in high costs for the finished part. And, the most commonly used polymer (epoxy resin) requires 24 to 50 hours to solidify after it's infused into the carbon fiber, further increasing costs.  In contrast, the density of steel is about 7.8 g/cc.  Carbon fibers are slightly stiffer than steel, but have one-fifth the weight.  Carbon laminate density is so low, it even beats the lightest structural metal, magnesium, which has a density of 1.8 g/cc.

Visually, CFRP has a woven or weaved design look that is exposed, you have probably seen it many times on vehicle components, such as roof panels, fenders and hoods.  Most likely what you saw was wraps of “Carbon Fiber Look” material on a fiberglass or composite panel on inexpensive vehicles.  CFRP components are very expensive and very light weight.  Generally, you will see CFRP components on high-end luxury vehicles, high-end muscle cars and sports cars and super cars.

Now keep in mind some OEMs will refinish CFRP components used for exterior and/or interior components.  Manufacturing vehicles like the McLaren 570S or SLR with an entirely composite structure is a massive undertaking.  In 1981 the world was introduced to the first Formula 1 carbon-laminate car.  As the years passed the technology transitioned to only a select few low production high-end models.  Despite intense research and development efforts over the past 35 years we are just starting to see carbon fiber laminate in vehicles under $50,000.  Some of the most complex challenges are producing carbon laminates in complex shapes, ensuring uniform penetration of the epoxy throughout the parts, taking into account the differing strength properties when the material is struck from different angles (strength is better in the direction of the fibers) and ensuring quality control.  Overcoming these challenges is expensive, so carbon-laminate composites are only used extensively in models that are entirely performance-oriented, including the Alfa Romeo 4C, the new Ford GT and the hybrid Porsche 918. 

But BMW changed all that in 2013, when BMW introduced the i3 and i8 CFRP electric vehicles.  Then BMW redesigned the 2016 7 Series, from the F01/02 to the new G12 platform, which features what they call a “carbon core” that blends carbon fiber, aluminum and high-strength steel components together. Carbon Fiber is the key part to provide additional rigidity to the uni-body structure. The systematic placement of the CFRP compliments the aluminum components and in other areas is actually a standalone structural member.  On the BMW 7 Series, CFRP is found in key areas for added strength, the B- and C-Pillar reinforcements, roof bows, the upper sides of the center tunnel, the package tray, rocker panel reinforcement, upper quarter panel brace and the upper outer roof rail reinforcement (A-Pillar/Windshield Post to Quarter Panel Sail Panel).  Aluminum extrusions and castings are utilized for critical suspension and engine mounting points and aluminum stampings make up the exterior body sheet metal.  Steel stampings make up the remaining structure of the vehicle.        

As for choosing the proper adhesive for making a repair, only follow what the OEM says to use in their repair procedures and only repair what they say can be repaired.  Never listen to a sales representative.  Generally, bonding will be done with a urethane adhesive or epoxy adhesive, while, to my research, repair work is always done with an epoxy.  The reason for epoxies being the choice for repair is that epoxies are not flexible and will form a solid attachment, whereas urethanes are too flexible for most repairs.  A repair is classified as cosmetic when the carbon fibers are not damaged or have been breached, such as a when the surface of the panel is scratched or some minor pitting is visible.  This basic type of repair involves hiding the imperfection and painting the repaired portion.   An epoxy filler can be used to make this repair, since it is as rigid as the panel.  When more significant damage has directly impacted or penetrated through the carbon fibers, such as a hole, the damaged fiber must be replaced with a suitable repair fiber and an epoxy adhesive.

Carbon Fiber Repairs

When a carbon fiber intensive vehicle sustains damage to the structural components the repair procedures and protocols take more skill and technique, and the OEM will have specific materials and products for the repair.  Carbon fiber material for automobiles is made up of multiple layers and the amount of layer will be a contributing factor in the repair vs. replace decisions, joining methods, adhesive material type, the type of carbon fiber repair cloth and the direction of the orientation utilized for the required repairs.  Keep in mind carbon fiber cloth has a directional weave, think like directional tires.  According to some repair procedures I have reviewed, repair procedures may require the various layers of carbon fiber cloth used for the repairs to be rotated, 30 degrees, 45 degrees, 90 degrees. The reason for this is the cloth has more strength in one direction than another direction.  Additionally, the procedures may call for 12-to-14 layers or more of CFRP.

Understanding the difference between plastic bumper repair, SMC, FRP and CFRP is to consider that to make a repair to CFRP, you perform a process they call “scarfing.” In this process, the repair technician uses a tool to dress the area (grind) outwards to expose each layer of cloth (think a SMC pyramid repair process) and then begins to build the repair from the low center outward.  Now the hard part is that each layer of repair carbon fiber cloth must be oriented to match the original structure.  The crucial question that has to be answered when deciding to repair or replace a carbon fiber part is the same question we have asked ourselves with steel and aluminum:

• What does the OEM say about the repair?
• Will the repair adversely affect occupant safety, airbag deployment timing of collision pulse management?
• But for CFRP, will the repair be strong enough to survive the life of the vehicle?

Some basic and general recommendations are as follows:

• If a damaged carbon fiber part has a hole in its center, that repair will be strong since it is surrounded by support.
• If a carbon fiber part is missing a corner piece, such as a corner broken off of a hood, can that part be repaired, or does a new hood have to be ordered? Or the edge of a fender panel is cracked, can it be repaired?  Because the repair area is hanging off the edge of the hood panel or the edge of the fender panel the repair may not be strong enough for the lifetime of the vehicle, due to the applied stress.

Carbon Fiber Education

As we mentioned before, as carbon fiber becomes more and more mainstream as a manufacturing material (“cheaper to produce”), it will be used in more areas of car design.  Since carbon fiber is extremely strong and lightweight, we will eventually see OEM’s using CFRP as reinforcement in A or B pillars, rocker panels, roof rails and on closure panels on higher production more affordable vehicles, instead of just super cars.  As SMC and FRP was an alternative to fiberglass in the 1990’s, carbon fiber is being used as an alternative to SMC or FRP.  Training will become paramount for the collision repair industry, but not to worry, most of the procedures for repair to CFRP is similar to those for SMC.  Additionally, several training programs are available, such as Abaris Training (pricey but excellent, https://www.abaris.com/training-programs/ and select repair) and I-CAR training programs and Alliance courses (more affordable, convenient, but not as in depth or informative) for those interested in learning more about carbon fiber repairs.  Many OEM’s such as BMW, Audi, McLaren, Alfa Romeo to name a few have courses that their Certified Collision Repair Facility (CCRF) Program shops are required to attend and specific equipment purchases.  The industry is changing rapidly and shop owners must invest in training and equipment purchases for these changes.