Commitment To Training

Search Autoparts/Automechanika-chicago/Commitment-training/

The benefits of a complete brake job

Careful attention to complete brake system ensures top performance and safety
Wednesday, December 7, 2016 - 09:00
Print Article

Other important steps in the inspection and repair process for front brakes include checking the brake calipers, opening the bleeder valve when compressing the brake caliper/piston to bleed any contaminated brake fluid, adding fluid to the master cylinder, and testing brake fluid to ensure that it is not contaminated and doesn’t need to be flushed out of the system to remove undesirable moisture and other contaminates.

All of these same steps should be followed by technicians if a vehicle has rear disc brakes. If the vehicle has rear drums and shoes, it is necessary to take the rear brake system apart to inspect the components. Technicians should be checking that there is no uneven wear to the brake shoes and that they are still integral, with the bonding to the backplate intact, lining thickness sufficient, and no cracks or uneven wear. Given that brake shoes have many spring components, it is important to replace these springs when performing a brake job, since over time the springs can lose their tension and will not hold the shoes as tightly and the system loses efficiency.

A critical step, if replacing brake shoes, is to replace the wheel cylinder as well. Wheel cylinders and brake shoes undergo the same amount of wear, and though the wheel cylinder may outlive the brake shoes in some cases, replacing them when replacing shoes may prevent a future comeback due to the old wheel cylinders leaking fluid on the new brakes shoes.

The final key step in the complete brake job process is to perform a road test and carefully break in the new brakes: perform 30 stops from 30 miles per hour, with 30 seconds between each stop to cool. Though this process will take about 15 minutes, this important procedure allows the new brake pads and rotors to mate up and create the friction film transfer to the rotor as discussed above, as well as controlling noise. If technicians do not have time to perform the break in process, it should be strongly recommend to the customer. This key step helps to avoid customers coming back to complain about noise, pedal feel, or long braking distance with their new brakes, and helps extend the life of the brake pads.

Benefits of completing this process
As indicated above, one of the greatest benefits to a shop of performing complete brake jobs is ensuring customer satisfaction. By taking the time to do the process right the first time, technicians can secure customers’ loyalty and ensure that they will return for future work. Additionally, shops save time overall by avoiding comebacks.

Technicians dealing with customers who are unsure that a complete brake job is in their best interest should convey that failing to take care of all of the components at once could mean that the vehicle will be back in the shop for additional brake issues. In the long run, customers can expect smoother braking, quieter operation, and greater longevity, with a lot less time spent in the shop, if a complete brake job is performed from the beginning. In restoring the brakes to like-new condition, technicians ensure that everything works correctly and continues to do so for a long time.

Even more important than saving costs, however, is ensuring customer safety. Partial brake jobs lead to major safety concerns. If stopping distance is extended due to an improper film on the rotors, high moisture content in the brake fluid, or some other reason, customers are less likely to be able to stop their vehicle in time in an emergency situation.  The brake job is if a technician cuts and resurfaces the rotors and puts them back into the brake system with new brake pads instead of replacing the rotors. Even if the rotors are still within specifications, they are still significantly lower in weight than they were originally. The lighter weight rotors are not able to dissipate heat as quickly. When they inevitably become heat-soaked, stopping distance is extended, brake fade occurs, and in extreme cases the vehicle may not be able to stop at all.

A complete brake job, as described in this article, is designed to restore the vehicle’s brake system and braking performance back to the same as it was when the vehicle left the factory. In understanding this process as well as the reason for doing so from both the shop’s and vehicle owner’s perspectives, technicians can explain to customers why a complete brake job is necessary, and can ensure customer loyalty.

Article Categorization
Article Details
< Previous
Next >
blog comments powered by Disqus