Multimatic™ 200 MIG/TIG/Stick welder — $2,004 MSP
A durable, impact-resistant polycarbonate case protects this all-in-one portable multiprocess welding power source capable of performing MIG, Stick and TIG welding processes in one compact design. The system weighs only 29 pounds and connects to common 120- and 230-volt power receptacles with the Miller-exclusive MVP™ (multi-voltage plug).
Millermatic® 211 Auto-Set™ with MVP™ MIG welder — $1,159 MSP
This MIG welder packs a class-leading 3/8-inch-thick welding capacity into a highly portable case. Featuring Auto-Set™ to eliminate the need to set voltage and wire feed speed, and MVP for quick and tool-less change over between 120V and 230V input power, this unit is ideal for welding in maintenance, farm, home, hobbyist and personal-use applications.
Millermatic® 212 Auto-Set™ MIG welder — $1,878 MSP
This machine features a 210-amp unit with a higher duty cycle for making longer welds on thicker material. Welds material from 22 gauge to 3/8-inch thickness in a single pass.
Syncrowave® 210 TIG/Stick welder — $2,678 MSP
The new inverter-based welder with operator-friendly interface, is AC/DC TIG and DC Stick-capable — with the ability to weld up to 1/4-inch-thick material in a single pass. It is anchored by innovative technologies and is the first Miller TIG welder to include the Pro-Set™ feature, which takes the guesswork out of setting weld parameters by offering preset controls designed by Miller weld engineers. Miller-exclusive Auto-Line™ technology and MVP allow for easy hookup to any input voltages within 115 – 230 V with no manual linking, providing reliable input power regardless of welding conditions.
Bobcat™ 250 EFI welder/generator — $4,510 MSP
The Bobcat 250 engine-driven welder/generator with EFI reduces fuel use up to 27 percent, lowers noise by as much as 33 percent, and is 5 inches shorter and up to 55 pounds lighter than previous models. The welder/generator offers 40 to 275 amps for both DC Stick/TIG and AC TIG/Stick applications, and 17 to 28 volts of output power when matched with a wire feeder for MIG or Flux-Cored welding. Rated at 104 degrees Fahrenheit, the machine offers 12,000 watts peak and 10,500 watts continuous power.
Customers will receive the rebate approximately four weeks following submission of the mail-in rebate form. For more information on the Build with Blue rebate offer, customers can visit their local distributor or MillerWelds.com/buildwithblue.
Subscribe to ABRN and receive articles like this every month…absolutely free. Click here