Kia's Chicago Auto Show concept has HRE wheels, Michelin tires

Jan. 1, 2020
Custom HRE-K1 monoblock billet wheels Michelin Pilot Sport PS2 high performance tires are adorning the Kia Track?ster Soul-type concept vehicle on display at the Chicago Auto Show.
Custom HRE-K1 monoblock billet wheels Michelin Pilot Sport PS2 high performance tires are adorning the Kia Track’ster Soul-type concept vehicle on display at the Chicago Auto Show.

Size 245/40-19 tires are on the front with size 285/35-19 at the rear.

“The idea was to make the Track’ster tough looking, like a bulldog,” says Tom Kearns, the automaker’s chief designer. “But the car had to be approachable as well. We wanted to base the car in reality so people instantly knew it was a Soul, but with a lot of attitude. It had to be a bold interpretation that would change people’s conceptions of what a sporty Kia could be.”

The bold attitude Kearns refers to starts with the Whiteout and Inferno Orange paint scheme. While the white portrays complex layers and shades that contribute to dramatic depth, the orange is perfectly suited for racing. Kia’s signature grille features an air intake slit and is trimmed in lightweight carbon fiber.

Smoothly integrated head lights sweep back suggestively over the sculpted front-wheel arches. The deeply recessed lenses echo the trapezoid themes found throughout the Track’ster and are accented with compelling LEDs, according to Kearns, who continues onward with a vivid description of the car:

Most striking up front is the Track’ster’s lower intake grille. Flanked by immense LED driving lights with billet aluminum surrounds, the Track'ster is capable of swallowing prodigious amounts of air to keep the engine running cool even under the most grueling conditions. The lower valance, trimmed in carbon fiber and accented with Inferno Orange, rides just inches off the ground and lends to the car’s menacing stance.

The Track’ster is not just another pretty face; it has a body to match. Sculpted surfaces seem to flow into each other naturally. The flanks are smooth but accented with well-defined wheel enclosures.

 

PAGE 2

Tucked beneath the Track’ster’s hips are custom HRE-K1 monoblock billet performance wheels that were a joint effort of Kia’s California design team and HRE. The wheels are wrapped in 245/40-19-inch front and massive 285/35-19-inch rear Michelin Pilot Sport PS2 high performance tires.

The wheelbase on the concept is stretched to 101.2 inches, almost an inch longer than the production Soul. As expected on a car with the Track’ster’s performance intentions, large 14-inch Brembo vented and cross- drilled disc brakes are embraced by six-piston calipers in front and 13.6- inch discs are paired with four-piston calipers at the rear.

Soul fans will instantly recognize the Track’ster’s angled roof, accented with Inferno Orange. Closer inspection reveals this concept, while Soul- inspired, is missing the production car’s rear doors. The front doors have been lengthened and adorned with smooth billet push-style handles which echo the racing-inspired billet fuel filler door. Carbon fiber lower side valances also are accented in Inferno Orange and incorporate functional rear-brake cooling ducts. The back hatch incorporates a horizontal Inferno Orange “backpack” panel that accentuates the Track’ster’s 75.5-inch width, which is more than five inches wider than a production Soul.

With performance as the top priority, the Track’ster rolls into Chicago with a concept drivetrain sure to kick start any driving enthusiast’s heart. The design team dreamed big, but also kept their vision firmly rooted in reality. A 2.0-liter turbocharged four-cylinder engine pumps 250 horsepower to the pavement, a 66 percent increase over that of the production Soul.

Power is routed to all four wheels via an electronically controlled four- wheel-drive system. The short-throw six-speed manual transmission is capped with a stubby spherical shift lever. The Track’ster rides on a lowered sport suspension tuned for track performance.

 

PAGE 3

Opening the driver’s door reveals a light and airy interior highlighted with deeply bolstered Inferno Orange suede-covered racing seats. Granite Gray leather envelops the interior landscape and imparts a feeling of strength and stability. Granite Gray suede wraps the sport steering wheel and door panels. Located deep within red-glowing nacelles, the primary instruments are large and easily readable. Auxiliary vehicle information such as oil temperature and battery voltage is found atop the dash panel while navigation, entertainment and HVAC controls are accessed through a large touch-screen panel located just above the engine Start/Stop push- button.

Behind the front seats is where Track’ster takes a significant step away from its Soul stable mate. The rear seats have been removed and replaced with a fully integrated equipment tray and spare-tire well.

“We saw the Track’ster as a performance-inspired concept that could spend time on the road and racetrack,” Kearns continues. “The idea was to make the tools and equipment necessary to keep the car performing in top condition easily accessible.”

Large paneled bins stow racing gear such as helmets, suits, gloves and tools while emergency supplies are housed within a separate and highly visible Inferno Orange container. A custom rear strut brace incorporates a quick-release handle to allow for fast wheel changes.

While there are no current plans to produce the Track’ster, “concept cars are icing on the cake,” says Kearns. “They allow (our) design team to dream about what could be. Whether that dream becomes a reality or not is a separate question.”

For more information, visit www.michelinman.com and www.kia.com.

Sponsored Recommendations

Best Body Shop and the 360-Degree-Concept

Spanesi ‘360-Degree-Concept’ Enables Kansas Body Shop to Complete High-Quality Repairs

How Fender Bender Operator of the Year, Morrow Collision Center, Achieves Their Spot-On Measurements

Learn how Fender Bender Operator of the Year, Morrison Collision Center, equipped their new collision facility with “sleek and modern” equipment and tools from Spanesi Americas...

Maximizing Throughput & Profit in Your Body Shop with a Side-Load System

Years of technological advancements and the development of efficiency boosting equipment have drastically changed the way body shops operate. In this free guide from GFS, learn...

ADAS Applications: What They Are & What They Do

Learn how ADAS utilizes sensors such as radar, sonar, lidar and cameras to perceive the world around the vehicle, and either provide critical information to the driver or take...