Bosch tech tip: Installing spark plugs requires precision, care

June 25, 2014
Once a relatively simple task for automotive technicians, spark plug installation on modern vehicles requires a great deal of precision and care. This is especially the case with late-model vehicles.

Once a relatively simple task for automotive technicians, spark plug installation on modern vehicles requires a great deal of precision and care. This is especially the case with late-model vehicles with high-tech engines that have very little tolerance for improper installation or use of spark plugs.

Apply the Proper Torque
When installing spark plugs, a technician must be aware of the torque specification for that particular plug. All Bosch Spark Plug packages, for example, specify a published foot-pound torque rating that needs to be applied using a torque wrench.

It is important to remember that either over-torquing or under-torquing a spark plug will affect the quality of the installation and the performance of the vehicle’s engine.

This spark plug was over-torqued. The contact marks, plug wear, and cracking on the ceramic insulator indicate that it was installed using an impact driver rather than a torque wrench. 

If a spark plug is under-torqued, it will be loose in the cylinder and, as a result, combustion gases will be allowed to escape from the engine instead of working to power it. Furthermore, a loose spark plug can be damaged by engine vibrations.

Many spark plugs that are submitted for warranty claims are damaged due to under-torquing – which may not be covered under warranty.

On the other hand, over-torquing a spark plug has equally damaging effects. If too much pressure is put on the seat of the spark plug, it will damage the insulator, the shell, and other components of the plug. Such damage leads to premature failure of the spark plug and again, loss of engine performance – and is most likely not covered under warranty.

While Bosch does offer guidelines for proper installation of spark plugs without a torque wrench, the only correct way to install a spark plug and ensure proper functioning, is by using a torque wrench to tighten the plug to the proper foot pound of pressure.

This spark plug shows evidence of damage due to under-torquing. Because it wasn’t tight enough in the cylinder, the spark plug vibrated itself loose and allowed combustion gas deposits to form around the plug. Additionally, the vibrations of the loose plug in the cylinder eventually separated the ceramic insulator from the shell and broke off the center and ground electrodes. 

Spark Plug Gap
Another important factor in ensuring proper functioning of the spark plug is making sure that the gap is correct. Spark plug gap is the distance from the center electrode tip to the ground electrode. This gap is the area in which the electric spark is generated and the flame kernel forms to ignite the air-fuel mixture in the cylinder. If the gap is too small, the flame kernel will not grow and will leave the air-fuel mixture unburned, reducing engine performance and gas mileage.

On the other hand, if the gap is too large, there won’t be enough electricity provided to create a spark. This will lead to a misfire. In the past, technicians would have to manually check and adjust the gap to a precise measurement to ensure proper engine performance.

All Bosch Iridium, Double Platinum, and Platinum Spark Plugs come pre-gapped from the factory to save time and to ensure the proper gap for the application.

For information on the entire portfolio of Bosch Spark Plugs, visit http://www.boschautoparts.com/SparkPlugs

Subscribe to Motor Age and receive articles like this every month…absolutely free. Click here

Sponsored Recommendations

ZEUS+: The Cutting-Edge Diagnostic Solution for Smart, Fast, and Efficient Auto Repairs

The new ZEUS+ simplifies your diagnostic process and guides you through the right repair, avoiding unnecessary steps along the way. It gives you the software coverage, processing...

Diagnostic Pre- and Post-scan Reports are Solid Gold for Profitability

The following article highlights the significance of pre-scans and post-scans, particularly with Snap-on scan tools, showcasing their efficiency in diagnosing issues and preventing...

Unlock Precision and Certainty: TRITON-D10 Webinar Training for Advanced Vehicle Diagnostics

The TRITON-D10 lets you dig deep into the systems of a vehicle and evaluate performance with comparative data, systematically eliminating the unnecessary to provide you with only...

APOLLO-D9: Trustworthy Diagnostics for Precision Repairs

The APOLLO-D9 provides the diagnostic information and resources you need to get the job done. No more hunting through forums or endlessly searching to find the right answers. ...

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!