The SATAjet® 1500 B SoLV is the newest addition to the SATA family of spray equipment. With its name, SoLV, short for Solvent, Low VOC and Low Viscosity, it is a spray gun targeted at a specific segment of the collision repair industry. Designed for full system applications: solvent-based basecoats, either Low VOC or National Rule as well as spraying sealer and clearcoat.
With the slightly shorter, but wider fan, the spray gun is designed with low overspray and a low material consumption. Most common nozzle sizes for your general purpose use would be in HVLP the 1.4, especially if you like to spray fast, or 1.3 if you like to spray a little slower, with more attention to detail, and in the RP model the 1.3. The HVLP uses only 12.4 CFM of air volume at 26 psi inlet pressure and the RP version uses only 10.2 CFM air volume at 29 psi. You should be able to run this with a 5 hp compressor. If you have larger compressors in the shop, it will not work them very hard at all.
To those who are lifelong users or have not used SATA spray guns before, you can’t go wrong, so try SATA’s affordable, high quality SATAjet 1500 B SoLV today.